• No.95 Qilian street, block B, 22F, High-tech Zone,Shijiazhuang City, China, 050000
  • Follow On Social :

GKC433D Switchgear Analyzer (3 phases transducers motion)

  • Home Products
  • GKC433D Switchgear Analyzer (3 phases transducers motion)
GKC433D Switchgear Analyzer (3 phases transducers motion)
  • PB20D Circuit Breaker Control Power Supply
  • PB60D Circuit Breaker Control Power Supply
  • CDF8200A Capacitance and Dissipation Factor (Tan Delta) Tester
  • GI6805 Grounding Connection Device Parameters Tester

GKC433D Switchgear Analyzer (3 phases transducers motion)

Switchgear are key components in electrical power transmission and distribution systems, helping ensure reliable operation with a direct impact on availability, safety, and the economic efficiency of electricity supply.

SKU 19
Categories Circuit Breaker Testing

Switchgear are key components in electrical power transmission and distribution systems, helping ensure reliable operation with a direct impact on availability, safety, and the economic efficiency of electricity supply.

FEATURES:

1. The GKC433D circuit breaker analyzer provides timing and motion testing for all types of circuit breakers. It delivers reliable and accurate test results even in noisy high-voltage substations.
2. Measure the time parameters (close, open, open-close, and bounce) of 12 main contacts. Measure the operating/co-operating time between 6 main contacts and 6 auxiliary contacts.
3. Measure the pre-insertion time and resistance of 6 resistor contacts.
4. Panel-mounted with 12 contact state indicator lamps, enabling easy determination of close and open states.
5. Equipped with 3 analog input channels and 3 digital input channels. Measure the stroke (travel), over-travel, rebound, overshoot, and speed of the breaker using a resistance transducer or digital transducer.
6. Uses a digital rotary transducer for angle measurement.
7. Supports operating control sequences: Close, Open, O-C-O, O-C, and C-O.
8. Perform mechanical characteristic testing of the circuit breaker manually.
9. Create and store 50 speed definitions for circuit breakers.
10. Built-in DC control output, suitable for action voltage testing.
11. Built-in DC output for motor driving.
12. Measures the motor current curve during motor driving.
13. Control outputs use an IGBT electrical switch with high precision and long service life.
14. Built-in DC/AC current sensor for measuring close and open control currents.
15. Stores up to 60 test results in memory. Power loss will not result in loss of stored data.
16. Stored data can be transferred to a USB flash drive.
17. Use the USB flash drive to update the tester software.
18. LCD display for the operation interface, test data, contact timing, stroke, and current curves.
19. Thermal printer for fast printing of test results, including contact timing, stroke, and current curves.
20. Automatically performs up to 1,000 operation tests.
21. Operate the unit via a USB cable connected to a Windows PC.
22. On the PC, open and analyze data, generate a report, and print an A4 report.
23. Selectable Chinese or English interface.

 

SPECIFICATIONS:

Contact Inputs and Time Measurement

Main contact channels: 12

Auxiliary contact channels: 6

Resistor contact channels: 6

Measurement time range: 0 to 20 s

Accuracy: ±0.05% of reading (rdg) ± 0.1 ms  Resolution: 0.1 ms

Sample rate: 10 kHz to 100 kHz

Resistive contact range: 50 to 2000 Ω

Accuracy: ±1% of reading (rdg) ± 1 Ω  Resolution: 1 Ω

 

Motion Measurement

Stroke measurement

Accuracy: ±0.5% of reading (rdg) ± 0.2 mm  Resolution: 0.1 mm

Speed range: 0 to 20 m/s

Resolution: 0.01 m/s

Analog section:

3 channels

Transducer input range: 0 to 5 V

Transducer resistance: 50 Ω to 5 kΩ

Digital section:

3 channels

Incremental transducer with RS422

Angle accuracy: ±0.1°  Angle resolution: 0.05°

 

Current Measurement

Coil current measurement: 0 to 30 A (AC / DC)  Resolution: 1 mA

Motor current measurement: 0 to 40 A (AC / DC)  Resolution: 1 mA

 

Control Section

Control output capacity: 300 V / 30 A (AC / DC)

 

Built-in DC Power Source

DC power supply: 0 to 270 V / 20 A  Power: 4 kW

Voltage measurement: 0 to 300 V  Accuracy: ±0.5% of reading (rdg) ± 1 V

 

General

Power supply: 198 to 264 VAC  47 to 63 Hz

Environment: -20 to 50 °C
Humidity: ≤ 90% RH (non-condensing)

Weight: 12 kg

Dimensions: 492 × 392 × 218 mm