• No.95 Qilian street, block B, 22F, High-tech Zone,Shijiazhuang City, China, 050000
  • Follow On Social :

GKC433DR Switchgear Analyzer(3 Phases Transducers Motion)

  • Home Products
  • GKC433DR Switchgear Analyzer(3 Phases Transducers Motion)
GKC433DR Switchgear Analyzer(3 Phases Transducers Motion)
  • PB20D Circuit Breaker Control Power Supply
  • PB60D Circuit Breaker Control Power Supply
  • CDF8200A Capacitance and Dissipation Factor (Tan Delta) Tester
  • GI6805 Grounding Connection Device Parameters Tester

GKC433DR Switchgear Analyzer(3 Phases Transducers Motion)

GKC433D is a three-phase switchgear analyzer designed for motion transducers. It supports signal analysis for three-phase systems using transducers for motion monitoring.

SKU 19
Categories Circuit Breaker Testing

GKC433D is a three-phase switchgear analyzer designed for motion transducers. It supports signal analysis for three-phase systems using transducers for motion monitoring.

FEATURES:

1. The GKC433D circuit breaker analyzer provides timing and motion testing for all types of circuit breakers. It delivers reliable, accurate test results even in noisy, high-voltage substations.
2. Measure the time parameters (close, open, O-C asynchronism, and bounce) of 12 main contacts. Measure the operate time between 6 main contacts and 6 auxiliary contacts.
3. Measure the pre-insertion time and resistance of 6 resistor contacts.
4. Panel-mounted with 12 contact state indicator lamps to clearly judge the close and open states.
5. Equipped with 3 analog input channels and 3 digital input channels. Measure stroke, over-travel, rebound, overshoot, and speed of the breaker using a resistance transducer or a digital transducer.
6. Use a digital rotary transducer for angle measurement.
7. Supports control sequences: Close, Open, O-C-O, O-C, C-O.
8. Manually test the mechanical characteristic operated by the circuit breaker (CB).
9. Create and store 50 speed definitions for circuit breakers.
10. Built-in DC control output, available for action voltage testing.
11. Built-in DC output for motor drive.
12. Measure the motor current curve during motor driving.
13. Control outputs use an IGBT electronic switch, offering high precision and long service life.
14. Built-in DC/AC current sensors for measuring close and open control currents.
15. Store up to 60 test results in memory. Data is retained even after power loss.
16. Stored data can be transferred to a USB flash drive.
17. Use the USB flash drive to update the tester software.
18. LCD displays the operating interface, test data, contact timing, travel, and current curves.
19. A thermal printer quickly prints test results, including contact data, travel curves, and current curves.
20. Automatic action testing up to 1,000 times.
21. Connect to a Windows PC via USB cable for operation.
22. Open and analyze data on the PC, generate reports, and print A4 reports.
23. Selectable Chinese and English user interface.

SPECIFICATIONS:

Contact Inputs and Time Measurement

Main contact channels: 12

Auxiliary contact channels: 6

Resistor contact channels: 6

Measurement time range: 0 to 20 s

Accuracy (reference): ±0.05% of reading (rdg) ±0.1 ms  Resolution: 0.1 ms

Sample rate: 10 kHz to 100 kHz

Resistive contact range: 50 to 2,000 Ω

Accuracy (reference): ±1% of reading (rdg) ±1 Ω  Resolution: 1 Ω

Motion Measurement

Stroke measurement

Accuracy (reference): ±0.5% of reading (rdg) ±0.2 mm  Resolution: 0.1 mm

Speed range: 0 to 20 m/s

Resolution: 0.01 m/s

Analog section:

3 channels

Transducer input range: 0 to 5 V

Transducer resistance: 50 Ω to 5 kΩ

Digital section:

3 channels

Incremental transducer with RS422

Angle accuracy (reference): ±0.1°  Angle resolution: 0.05°

Current Measurement

Coil current measurement: 0 to 30 A (AC/DC)  Resolution: 1 mA

Motor current measurement: 0 to 40 A (AC/DC)  Resolution: 1 mA

Control Section

Control output capacity: 300 V / 30 A (AC/DC)

Built-in DC Power Source

DC power supply: 0 to 270 V / 20 A  Power: 4 kW

Voltage measurement: 0 to 300 V  Accuracy (reference): ±0.5% of reading (rdg) ±1 V

General

Power supply: 198 to 264 VAC  47 to 63 Hz

Environment: -20 to 50 °C

Humidity: ≤90% RH  Non-condensing

Weight: 12 kg

Dimension: 492 × 392 × 218 mm