Performs partial discharge analysis by collecting ultrasonic signals generated by partial discharges in the tested equipment. Suitable for partial discharge inspection of electrical equipment including overhead transmission line insulators, high-voltage insulation sleeves, switchgear, GIS bushings, and cable joints.
| SKU | 17 |
| Categories | Partial Discharge Analyzer |
Performs partial discharge analysis by collecting ultrasonic signals generated by partial discharges in the tested equipment. Suitable for partial discharge inspection of electrical equipment including overhead transmission line insulators, high-voltage insulation sleeves, switchgear, GIS bushings, and cable joints.
FEATURES:
Meets IEC-60270 standard; measures PD levels using the impulse current method
Equipped with internal and external utility frequency synchronization function
Wide dynamic range with auto-range gain selection
Multiple combinations for high-pass and low-pass filters
Integrated PD level vs. applied voltage curve for estimating inception voltage and extinction voltage
Integrated PRPS (phase-resolved pulse sequence) graph: displays PD level, phase, and time on a single 3D rendered graph
Integrated PRPD (phase-resolved partial discharge) graph: accumulates phase and PD repetition rate over time; supports both log-log and decade scales
RTSA (real-time spectrum analyzer) included; toggle frequency range from 1 MHz to 10 MHz. Special graph persistence helps identify noise frequency bands and PD frequency bands
Built-in backup battery with automated shutdown upon power loss
Full keyboard and touchpad mouse integrated for in-field report editing
13.3” industrial color LED display with good low-temperature performance
Internal Wi-Fi module enables real-time remote control and customer support
Automated report generation
SPECIFICATIONS:
Sampling channel: independent two-channel
Sampling rate: 12–50 Msps per channel
Sampling depth: 16-bit
Time-base accuracy: 50 ppm
Dynamic range: -40 dB to 60 dB (auto/manual adjustment)
PD range: 0.05 pC to 1000 nC
Sensitivity (reference): 0.1 pC
Internal filter: high-pass (20 kHz, 40 kHz, 80 kHz, 1 MHz)
Low-pass (150 kHz, 400 kHz, 1 MHz, OFF)
Test object capacitance: 6 pF to 25 μF
Sensor: measurement impedance, HFCT
Nonlinear error: less than 3%
Test power frequency range: 20–500 Hz
Communication: 2×USB, RJ45, Wi-Fi
OS: Windows &
Internal storage: 64 GB SSD
Display: 13.3” LED, 1280×720
Power supply: 90–264 V AC, 47–63 Hz
Operating environment: -20 to 50 ℃
Humidity: ≤90% RH, non-condensing
Dimension: 405×335×190 mm
Weight: 9 kg