Power-frequency parameters of long-distance EHV and UHV transmission lines are essential for power system modelling and analysis, but they are difficult to measure accurately because the lines are reactance-dominated and affected by strong external interference.
| SKU | 20 |
| Categories | Transmission Line Parameter Testing |
Power-frequency parameters of long-distance EHV and UHV transmission lines are essential for power system modelling and analysis, but they are difficult to measure accurately because the lines are reactance-dominated and affected by strong external interference.
INSTRUCTION:
Power-frequency parameters of long-distance extra-high-voltage (EHV) and ultra-high-voltage (UHV) transmission lines form the basis of power-system modelling and analysis. However, these parameters are particularly difficult to measure accurately due to the reactance-dominant nature of the lines and strong external interference.
HANY LPT15 series transmission line analyzers use a new variable-frequency technical approach to measure the parameters.
The LPT15 series transmission line analyzer is suitable for measuring power-frequency parameters of overhead lines and cables, including the verification of conductor phases and the measurement of line DC resistance.
The analyzer adopts an all-in-one design with an all-electronic non-working frequency transformer. Compared with the traditional inverter and frequency-transformer structure on the market, it offers smaller size, lighter weight, and more convenient carrying.
The unique absorption feedback circuit technical enables the tester to withstand 10 to 100 A of induced current without the need for an anti-jamming suppression device.
The unique three-phase parallel output mode enables zero-sequence impedance measurement and achieves three times the induced-current capability of a single-phase output mode.
Based on the variable-frequency test principle, together with the hardware and digital filtering technical and Fourier transformation technical, the instrument achieves accurate measurement results.
The LPT15 series integrated tester for transmission line parameters is a strong embodiment of modern power electronics and signal-processing technology.
FEATURES:
1. Variable-frequency method for accurate measurement of: positive-sequence short-circuit impedance, positive-sequence open-circuit impedance (positive-sequence capacitor), zero-sequence short-circuit impedance, zero-sequence open-circuit impedance (zero-sequence capacitor), coupling inductor (mutual inductor), coupling capacitor, and induced current.
2. DC power method for checking line phases.
3. Measures line DC resistance and converts the resistance to the corresponding temperature reference (temperature-referenced conversion).
4. Measures induced voltage. A voltage divider is required when the induced voltage exceeds 750 V.
5. Built-in Bluetooth (Option): operate the analyzer via Bluetooth using a mobile phone or tablet to improve safety.
6. All-in-one design using an all-electronic non-working frequency transformer, providing small size, light weight, and convenient carrying.
7. One-time connection allows phase verification, DC resistance measurement, and line parameter testing in a single procedure, improving work efficiency and reducing hazards caused by changing connections.
8. Combination of hardware and software anti-jamming measures, with anti-frequency-interference capacity up to 1,000 times.
9. Zero-sequence impedance measurement uses a three-phase parallel output mode, enabling induced-current capability three times higher than the single-phase output mode.
10. No additional anti-jamming suppression device required. The analyzer can withstand 10 to 100 A of induced current (different model).
11. Performs voltage boosting, measurement, and voltage reduction automatically, and calculates results automatically to save test time.
12. Saves current and voltage curves and analysis results to a computer.
13. Built-in high-capacity memory stores 1,024 sets of data and retains data without power.
14. Use a USB drive to transfer test data and perform software upgrades.
15. The operating interface and test data are displayed on the LCD screen, clearly visible both indoors and outdoors.
16. High-speed thermal printer for printing test data.
17. Input power overvoltage protection (≥270 V AC).
18. Ungrounded-state prompt function.
SPECIFICATIONS:
1. Power supply: single-phase AC 198–264 V, 47–63 Hz, 5 kVA
2. Output voltage: three-phase, 0–200 V (RMS)
3. Output current: three-phase, 0–10 A (RMS)
4. Test frequency: 42–58 Hz
5. Capacitance measuring range: 0.1–30 μF; resolution: 0.01 μF
Accuracy: 0.1–1 μF ±(3% of reading + 0.01 μF); 1–50 μF ±(1% of reading + 0.01 μF)
6. Resistance measuring range: 0.5–400 Ω; resolution: 0.01 Ω
Accuracy: 0.5–1 Ω ±(3% of reading + 0.01 Ω); 1–400 Ω ±(1% of reading + 0.01 Ω)
7. Impedance angle measuring range: 0–360°; resolution: 0.01°
Accuracy: ±0.3°
8. DC resistance measurement range: 0.02–60 Ω; resolution: 0.1 mΩ
Accuracy: ±(0.2% of reading + 0.2 mΩ) (The equipment outputs a current of 2 A to 4 A according to the resistance.)
9. Voltage measurement range: 10–750 V; accuracy: ±(0.5% of reading + 0.2 V)
10. Current measurement range: 0.5–20 A; accuracy: ±(0.5% of reading + 0.02 A)
11. Induced voltage withstand: < 30 kV
12. Induced current withstand: each phase 10 A; zero sequence 30 A
13. Dimensions: 492 × 395 × 216 mm
14. Weight: 16.9 kg
15. Environment: T: -20 to 50°C; H ≤ 90% RH