Power-frequency parameters of long-distance EHV and UHV transmission lines are essential for power system modelling and analysis, but accurate measurement is challenging because the lines are reactance-dominated and exposed to strong external interference.
| SKU | 20 |
| Categories | Transmission Line Parameter Testing |
Power-frequency parameters of long-distance EHV and UHV transmission lines are essential for power system modelling and analysis, but accurate measurement is challenging because the lines are reactance-dominated and exposed to strong external interference.
INSTRUCTION:
Power-frequency parameters of long-distance extreme-high-voltage (EHV) and ultra-high-voltage (UHV) transmission lines are the basis for power system modelling and analysis. However, these parameters are particularly difficult to measure accurately due to reactance-dominated characteristics and strong external interference.
The HANY LPT15 series transmission line analyzer uses a new variable-frequency technical method to measure these parameters.
The LPT15 series power-frequency parameter analyzer is suitable for measuring overhead line and cable power-frequency parameters. It supports phase verification and DC line resistance measurement.
The analyzer features an all-in-one design based on an all-electronic non-working frequency transformer, offering advantages of compact size, light weight, and convenient portability compared with the traditional inverter and frequency-transformer structure on the market.
The unique absorption feedback circuit technical enables the tester to withstand 10 to 100 A of induced current without the need for an anti-jamming suppression device.
The unique three-phase parallel output mode enables zero-sequence impedance measurement and provides an induced current capability three times that of a single-phase output mode.
Based on a variable-frequency testing principle, and using hardware and digital filtering technologies along with Fourier Transformation technology, the instrument achieves accurate measurement.
The LPT15 series integrated tester for transmission line frequency parameters is an excellent embodiment of modern power electronics and signal processing technology.
FEATURES:
1. Using variable-frequency method to accurately measure: positive-sequence short-circuit impedance; positive-sequence open-circuit impedance (positive-sequence capacitor); zero-sequence short-circuit impedance; zero-sequence open-circuit impedance (zero-sequence capacitor); coupling inductor (mutual inductor); coupling capacitor; and induced current.
2. Using a DC power method to check line phases.
3. Measuring DC line resistance and converting the resistance to the corresponding temperature reference.
4. Measuring induced voltage. A voltage divider is required when the induced voltage exceeds 750 V.
5. Built-in Bluetooth (Option): operate the analyzer via mobile phone or tablet through Bluetooth to improve safety.
6. All-in-one design with an all-electronic non-working frequency transformer, offering compact size, light weight, and convenient carrying.
7. One-time connection can complete phase checking, DC resistance measurement, and line parameter testing, improving work efficiency and reducing risks caused by changing connections.
8. Combination of hardware and software anti-jamming measures; anti-frequency-interference capability up to 1000 times.
9. Zero-sequence impedance measurement uses a three-phase parallel output mode, providing induced current withstand capability three times higher than the single-phase output mode.
10. No additional anti-jamming suppression device is required. The analyzer can withstand induced current from 10 A to 100 A (Different model).
11. Automatic boosting voltage, measurement, and low-down voltage operation with automatic calculation to save testing time.
12. Saves current and voltage curves and analysis results on a computer.
13. Built-in large-capacity memory stores 1024 sets of data and does not lose data when power is off.
14. Use a USB drive to transfer test data and software upgrades.
15. The operating interface and test data are displayed on the LCD screen, enabling clear viewing both indoors and outdoors.
16. High-speed thermal printer for printing test data.
17. Input power overvoltage protection ( >270 V AC).
18. Ungrounded warning prompt function.
SPECIFICATIONS:
1. Power supply: Single-phase AC 198~264 V, 47~63 Hz, power 5 kVA
2. Output voltage: Three-phase, 0~200 V (RMS)
3. Output current: Three-phase, 0~10 A (RMS)
4. Test frequency: 42~58 Hz
5. Capacitance measuring range: 0.1~30 μF; Resolution: 0.01 μF
Accuracy: 0.1~1 μF ±(3%C + 0.01 μF); 1~50 μF ±(1%C + 0.01 μF)
6. Resistance measuring range: 0.5~400 Ω; Resolution: 0.01 Ω
Accuracy: 0.5~1 Ω ±(3%Z + 0.01 Ω); 1~400 Ω ±(1%Z + 0.01 Ω)
7. Impedance angle measuring range: 0~360°; Resolution: 0.01°; Accuracy: ±0.3°
8. DC resistance measurement range: 0.02~60 Ω; Resolution: 0.1 mΩ
Accuracy: ±(0.2%R + 0.2 mΩ). (The equipment outputs current 2 A to 4 A according to the resistance.)
9. Voltage measurement range: 10~750 V; Accuracy: ±(0.5%U + 0.2 V)
10. Current measurement range: 0.5~20 A; Accuracy: ±(0.5%I + 0.02 A)
11. Standing induced voltage: <30 kV
12. Standing induced current: per phase 20 A; zero-sequence 60 A
13. Dimensions: 613×488×341 mm
14. Weight: 24.9 kg
15. Environmental conditions: T: -20~50 °C; H ≤ 90% RH